GHSA-9834-966g-q77h · 深刻度： high — In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after...
In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after-free in caif_serial ldisc_close() There is a use-after-free bug in caif_serial where handle_tx() may access ser->tty after the tty has been freed. The race condition occurs between ldisc_close() and packet transmission: CPU 0 (close) CPU 1 (xmit) ------------- ------------ ldisc_close() tty_kref_put(ser->tty) [tty may be freed here] <-- race window --> caif_xmit() handle_tx() tty = ser->tty // dangling ptr tty->ops->write() // UAF! schedule_work() ser_release() unregister_netdevice() The root cause is that tty_kref_put() is called in ldisc_close() while the network device is still active and can receive packets. Since ser and tty have a 1:1 binding relationship with consistent lifecycles (ser is allocated in ldisc_open and freed in ser_release via unregister_netdevice, and each ser binds exactly one tty), we can safely defer the tty reference release to ser_release() where the network device is unregistered. Fix this by moving tty_kref_put() from ldisc_close() to ser_release(), after unregister_netdevice(). This ensures the tty reference is held as long as the network device exists, preventing the UAF. Note: We save ser->tty before unregister_netdevice() because ser is embedded in netdev's private data and will be freed along with netdev (needs_free_netdev = true). How to reproduce: Add mdelay(500) at the beginning of ldisc_close() to widen the race window, then run the reproducer program [1]. Note: There is a separate deadloop issue in handle_tx() when using PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper serial backend). This deadloop exists even without this patch, and is likely caused by inconsistency between uart_write_room() and uart_write() in serial core. It has been addressed in a separate patch [2]. KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620 Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929 Call Trace: <TASK> dump_stack_lvl+0x10e/0x1f0 print_report+0xd0/0x630 kasan_report+0xe4/0x120 handle_tx+0x5d1/0x620 dev_hard_start_xmit+0x9d/0x6c0 __dev_queue_xmit+0x6e2/0x4410 packet_xmit+0x243/0x360 packet_sendmsg+0x26cf/0x5500 __sys_sendto+0x4a3/0x520 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0xc9/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f615df2c0d7 Allocated by task 9930: Freed by task 64: Last potentially related work creation: The buggy address belongs to the object at ffff8881131e1000 which belongs to the cache kmalloc-cg-2k of size 2048 The buggy address is located 1168 bytes inside of freed 2048-byte region [ffff8881131e1000, ffff8881131e1800) The buggy address belongs to the physical page: page_owner tracks the page as allocated page last free pid 9778 tgid 9778 stack trace: Memory state around the buggy address: ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb [2]: https://lore.kernel.org/linux-serial/[email protected]/T/#u
総合評価: CVE-2026-45866 は低リスク（35.3/100）。CVSS 深刻度は高。悪用される可能性が高い（EPSS 0.21%、11 パーセンタイル） 推奨対応: 悪用情報と EPSS の推移を監視し、必要に応じて優先度を見直してください。
リスクは変動します。再評価に基づき、本ページの表示内容を更新しています。
EPSS は日次で悪用されやすさの相対度合いを推定します。パーセンタイルは採点済み CVE の中での相対位置（高いほど相対的に深刻）を示します。
| # | 日付 | 旧 EPSS スコア | 新 EPSS スコア | Δ（新 − 旧） |
|---|---|---|---|---|
| 1 | 2026-06-15 | 0.02% | 0.21% | +0.19% |
| 2 | 2026-05-28 | — | 0.02% | — |
EPSS の全履歴 （全 2 件）
この CVE の CVSS 指標。
| ベーススコア | バージョン | 深刻度 | ベクトル | 悪用しやすさ | 影響 | スコアの出典 |
|---|---|---|---|---|---|---|
| 7.8 | 3.1 | HIGH |
|
1.8 | 5.9 | [email protected] |
GHSA-9834-966g-q77h · 深刻度： high — In the Linux kernel, the following vulnerability has been resolved: serial: caif: fix use-after...
| vendor | priority | summary | link |
|---|---|---|---|
debian
|
not yet assigned | CVE-2026-45866 not yet assigned priority: Debian including 1 source packages (linux), 5 status rows across 5 suites (bookworm, bullseye, forky, sid, trixie): resolved 5. | https://security-tracker.debian.org/tracker/CVE-2026-45866 |
redhat
|
— | — | https://access.redhat.com/security/cve/CVE-2026-45866 |
suse
|
— | — | https://www.suse.com/security/cve/CVE-2026-45866/ |
ubuntu
|
medium | CVE-2026-45866 medium priority: Ubuntu including 158 source packages (linux, linux-allwinner-5.19, …), 1422 status rows across 9 suites (bionic, focal, jammy, noble, questing, resolute, trusty, upstream, xenial): DNE 1024, ignored 173, needed 112, released 84, pending 18, not-affected 10, needs-triage 1. | https://ubuntu.com/security/CVE-2026-45866 |
| ベンダー | 製品 | バージョン | 生の CPE |
|---|---|---|---|
| linux | linux_kernel | >= 3.11, < 5.10.252 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 5.11, < 5.15.202 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 5.16, < 6.1.165 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 6.2, < 6.6.128 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 6.7, < 6.12.75 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 6.13, < 6.18.14 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |
| linux | linux_kernel | >= 6.19, < 6.19.4 | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* |