彙總 Zephyr Project 相關全部產品的 CVE 與安全漏洞情報，包括 CVSS、EPSS、公開時間與漏洞情報資料。
常見弱點模式包括 緩衝區溢位、記憶體損壞與輸入驗證問題，在 軟體部署與生產負載 使用場景中可能帶來 記憶體損壞、應用程式崩潰與異常行為 等風險。
相關漏洞資料主要來源於公開漏洞披露與安全公告，可用於評估歷史漏洞暴露面與修補優先順序。
| CVE | 摘要 | 來源 | 最高 CVSS | EPSS % | 公開時間 | 更新時間 |
|---|---|---|---|---|---|---|
| CVE-2026-10668 | The Nuvoton NuMaker HSUSBD USB device-controller driver (drivers/usb/udc/udc_numaker.c) armed the control Data IN stage unconditionally (base->CEPTXCNT = len in numaker_hsusbd_ep_trigger). Because the HSUSBD hardware cannot disarm a control Data IN already armed for a previous transfer, a USB host that cancels an in-flight control transfer (timeout) and then issues a new SETUP packet can drive the driver out of sync: stale data may be transmitted in the new transfer and the control endpoint can | [email protected] | 2.4 | 0.14% | 2026-07-12 | 2026-07-16 |
| CVE-2026-10667 | Zephyr's dynamic kernel-object tracking (kernel/userspace/userspace.c, formerly kernel/userspace.c) maintains a doubly-linked list (obj_list) of dynamically allocated kernel objects. Iteration over this list in k_object_wordlist_foreach() was performed under lists_lock using the SAFE iterator (which caches the next node), but list removal and freeing of nodes was performed under different, disjoint spinlocks: objfree_lock in k_object_free() and obj_lock in unref_check(). On an SMP system, while | [email protected] | 7.8 | 0.10% | 2026-07-12 | 2026-07-16 |
| CVE-2026-10666 | parse_ipv4() in subsys/net/ip/utils.c (reached via net_ipaddr_parse() for strings of the form "a.b.c.d:port") copies the port substring into a fixed 17-byte stack buffer (char ipaddr[NET_IPV4_ADDR_LEN + 1]) using a length of str_len - end - 1, where str_len is the full, unbounded input length and end is only the (<=15-byte) offset of the ':' delimiter. Because the destination size is never consulted, a crafted address string with a long suffix after the colon (e.g. "1.2.3.4:" followed by hundred | [email protected] | 8.1 | 0.35% | 2026-07-12 | 2026-07-17 |
| CVE-2026-10665 | In Zephyr's WireGuard subsystem (subsys/net/lib/wireguard), wg_process_data_message() in wg_crypto.c linearizes an inbound transport-data payload into a fixed pool buffer of CONFIG_WIREGUARD_BUF_LEN bytes before decryption. The call net_buf_linearize(buf->data, data_len, pkt->buffer, ..., data_len) passed the attacker-derived data_len as both the destination capacity and the copy length, defeating the function's internal len = min(len, dst_len) bound. data_len is derived from the received UDP da | [email protected] | 7.4 | 0.37% | 2026-07-12 | 2026-07-15 |
| CVE-2026-10664 | The nRF70 Wi-Fi driver's power-save event handler nrf_wifi_event_proc_get_power_save_info() in drivers/wifi/nrf_wifi/src/wifi_mgmt.c copied TWT (Target Wake Time) flow entries from an nrf_wifi_umac_event_power_save_info event into the fixed-size twt_flows[WIFI_MAX_TWT_FLOWS] (8-element) array of a caller-supplied struct wifi_ps_config, looping over event-provided num_twt_flows without validating it against WIFI_MAX_TWT_FLOWS or checking event_len. When num_twt_flows exceeds 8, the handler writes | [email protected] | 5.0 | 0.14% | 2026-07-12 | 2026-07-16 |
| CVE-2026-10663 | In Zephyr's experimental USB host stack (CONFIG_USB_HOST_STACK), usbh_device_disconnect() (subsys/usb/host/usbh_device.c) freed the root usb_device slab object without clearing the cached pointer ctx->root. The bus removal handler dev_removed_handler() (subsys/usb/host/usbh_core.c) decides what to tear down solely from ctx->root, checking only that it is non-NULL. Because UHC controller drivers (e.g. uhc_max3421e, uhc_mcux_common) synthesize UHC_EVT_DEV_REMOVED directly from physical bus line s | [email protected] | 6.1 | 0.16% | 2026-07-12 | 2026-07-16 |
| CVE-2026-10659 | The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL), | [email protected] | 4.7 | 0.09% | 2026-07-07 | 2026-07-14 |
| CVE-2026-10657 | Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getadd | [email protected] | 3.7 | 0.23% | 2026-07-05 | 2026-07-14 |
| CVE-2026-10656 | The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver threa | [email protected] | 4.6 | 0.18% | 2026-07-05 | 2026-07-14 |
| CVE-2026-9263 | The Zephyr Bluetooth controller ISO Adaptation Layer (subsys/bluetooth/controller/ll_sw/isoal.c) fails to validate the length field of a framed ISO PDU start segment. Per the Bluetooth specification a start segment (sc=0) always carries a 3-byte time_offset, so its segment-header len must be at least PDU_ISO_SEG_TIMEOFFSET_SIZE (3). isoal_check_seg_header() accepted start segments with len < 3 as valid, and isoal_rx_framed_consume() then computed length = seg_hdr->len - 3 in a uint8_t, underflow | [email protected] | 6.5 | 0.17% | 2026-06-30 | 2026-07-14 |
| CVE-2026-10655 | The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a ref | [email protected] | 6.5 | 0.25% | 2026-06-30 | 2026-07-14 |
| CVE-2026-10654 | A race condition in the Zephyr Bluetooth Classic RFCOMM host stack (subsys/bluetooth/host/classic/rfcomm.c) mishandles a simultaneous bidirectional session disconnect. When the local device has initiated a session teardown (state BT_RFCOMM_STATE_DISCONNECTING, DISC sent, RTX timer armed) and the connected peer concurrently sends its own DISC frame for dlci 0, rfcomm_handle_disc() invokes rfcomm_session_disconnected(), which unconditionally forced the session to BT_RFCOMM_STATE_DISCONNECTED witho | [email protected] | 3.1 | 0.12% | 2026-06-30 | 2026-07-14 |
| CVE-2026-10653 | The Zephyr net_buf library (lib/net_buf/buf.c) manipulated both of its reference counts -- the per-header buf->ref and the per-data-block ref_count at the start of each variable/heap data allocation -- with plain non-atomic C operators (buf->ref++, if (--buf->ref > 0), if (--(*ref_count))). The API is documented as self-synchronizing: callers may share one buffer across threads (e.g. via k_fifo) and each holder independently calls net_buf_unref() with no surrounding lock. Under true concurrency | [email protected] | 6.4 | 0.16% | 2026-06-30 | 2026-07-14 |
| CVE-2026-10652 | Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buff | [email protected] | 4.8 | 0.25% | 2026-06-30 | 2026-07-14 |
| CVE-2026-8023 | Zephyr's HTTP server (subsys/net/lib/http) provides a static-filesystem resource type (HTTP_RESOURCE_TYPE_STATIC_FS, available when CONFIG_FILE_SYSTEM is enabled) that serves files from a configured root directory. Before this fix, both the HTTP/1 and HTTP/2 front-ends placed the raw, attacker-controlled request path into client->url_buffer (assembled in on_url() for HTTP/1 and copied verbatim from the :path pseudo-header for HTTP/2) without resolving ./.. segments. The static-FS handler then bu | [email protected] | 7.5 | 0.91% | 2026-06-29 | 2026-07-14 |
| CVE-2026-7656 | The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was '((length/hop/source/target checks) && (icmp_hdr->code != 0))'. Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the | [email protected] | 8.1 | 0.23% | 2026-06-29 | 2026-07-14 |
| CVE-2026-10648 | mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = | [email protected] | 6.2 | 0.11% | 2026-06-29 | 2026-07-14 |
| CVE-2026-10647 | The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadloc | [email protected] | 5.3 | 0.13% | 2026-06-29 | 2026-07-14 |
| CVE-2026-10646 | Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue content | [email protected] | 7.4 | 0.26% | 2026-06-28 | 2026-07-14 |
| CVE-2026-10644 | The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte | [email protected] | 4.2 | 0.14% | 2026-06-28 | 2026-07-14 |